We buy roundwood in Rucava

Information updated as of 18.02.2021

Birch veneer logs

Class Height (m) Diameter (cm) Pricing (Eur/m3)
A 3 (+10cm) 26+ 135
B 3 (+10cm) 26+ 77
B 3 (+10cm) 18-25 67
C 3 (+10cm) 18+ 32
Waster – – 25
Quality requirements

Sleepers

Mesurement by a coeficient of 0,6

 Height (m)Diameter (cm)Pricing (Eur/m3)
Spurce2,8; 2,9 (+10cm)18+46
Pine2,8; 2,9 (+10cm)18+42
Quality requirements

Black alder and aspen

 Height (m)Diameter (cm)Pricing (Eur/m3)
Black alder2,5 (+10cm)18+–
Aspen2,5 (+10cm)18+–
Quality requirements

Place of acceptance:

“Arkveida noliktava”, Rucavas parish, Rucavas county

Contacts:

Phone No. +371 22063099
E-mail: toms.timbra@baltukoks.lv

Quality requirements

A Class

Curvature: 

One-sided – up to 1.5% per 1m, Two-sided – do not allow.

Branches:

Do not allow.

Cracks: 

Do not allow.

Core coloring:

Up to 30% of thin end.

Mechanical damage, adhesions, rot, blackening, bruising:

Do not allow.

B class

Curvature: 

One-sided – up to 2% per 1m, Two-sided – do not allow.

Branches:

Up to 2 branches per 1m (up to 5cm in diameter). Do not allow – rotten, dry, black.

Cracks: 

Do not allow.

Core coloring:

Up to 30%-50% of thin end.

Mechanical damage, adhesions, rot, blackening, bruising:

Do not allow.

C class

Curvature: 

One-sided – up to 2.5% per 1m, Two-sided – do not allow.

Branches:

Do allow.

Cracks: 

Do not allow.

Core coloring:

Do allow.

Mechanical damage, adhesions, rot, blackening, bruising:

Do not allow.

Quality requirements

Pine and Spurce sleeper blocks
(Sleeper blocks must be freshly cut from live/growing trees)

Acceptable:

Sinuosity up to 3%, heartwood colouring and rot, tree branches diameter and quantity is not limited, height of branch 4cm as maximum. Falling cracks and mechanical damage is acceptable only of thin end cylinder range.

Not acceptable:

Soft rot, overturning and lightning cracks, sapwood rot, insect damage (larval passages), charring/burning.

Quality requirements

Black alder

Do allow:

Curvature up to 2% core staining without limitation, branches up to 10cm in unlimited amount.

Do not allow:

Soft rot, double curvature, tipping and lightning cracks.

Aspen

Allow:

Curvature up to 2% core staining without limitation, branches up to 10cm in unlimited amount.

Do not allow:

Soft rot, double curvature, tipping and lightning cracks.